Table of Contents
Advertisement
20
Glass Frame Removal and Installation
Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Note:
If using a Victorian Lace or Bungalow face, attach the arch covers after installing the glass.
Open the four latches holding the glass
a
frame in place (start with the two below
the glass) - follow the directions shown
to the right.
Glass Frame
Lift the glass frame up
b
and pull it forward to
remove. NOTE:
You may need to lift the
glass frame while re-
attaching.
Re-Attaching the Glass Frame:
a)
Hang the glass frame on the firebox.
b)
While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c)
Lift the glass frame slightly and attach the lower latches.
© Travis Industries
Finalizing the Installation
NOTE:
Replace the cove
covers for those faces
using them.
4080123
Top of
Firebox
Glass
The latch will then disengage
from the latch bracket.
Latch
Push in on
the latch.
Twist 1/4 turn.
100-01174_002
Advertisement
Table of Contents
