Selecting Setup Pattern; Internal Cross Hatch Pattern - Barco R9002110 Owner's Manual

Selecting Setup Pattern

If an external source is connected to the projector, this menu will be displayed. Push the
control disk up or down to highlight the desired setup pattern and then press ENTER .
Genlocked pattern : internally generated cross hatch pattern, locked on the external source.
Internal # pattern : internally generated cross hatch pattern and locked on internal generated
sync signals. (No external source necessary)
ENTER continues to Random Access Adjustment Mode or Internal # Pattern
Selection.
EXIT returns to Path Selection menu.
ADJUST returns to Operational mode.
If no external source is connected to the projector, the internal cross hatch pattern menu will
be displayed.
Note: The menus in this manual are created for an external source, connected to one of the
inputs, and the 'Genlocked Pattern' is selected.

Internal Cross Hatch Pattern

The Internal # pattern menu will be displayed if the internal cross hatch pattern has been
selected or if no source is connected to the projector.
The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks are
custom programmable.
Push the control disk up or down to highlight the desired cross hatch frequency. Use the left
and right arrow to scroll to another page. Press ENTER . if the desired block is selected.
kHz/Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HIVISION
15.8/60 EGA 1
21.8/60 EGA 2
61.0/76 VGA 1,2
35.5/87 VGA 4
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
63.9/76 APPOLLO
22.2/60 MAC CLASSIC
ENTER continues to the Random Access Adjustment Mode.
EXIT returns to the Setup Pattern Selection menu.
5975188 RETRODATA 808s 200597
Random Access Adjustment Mode
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with
then <ENTER>
<EXIT> to return.
INTERNAL # PATTERN
kHz / Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
Select with or
scroll with or
<ENTER> to accept
<EXIT> to return
Source 01
or
7-3