Configuring Firewall Settings - Motorola AP-7131N-FGR Product Reference Manual

6-14 AP-7131N-FGR Access Point Product Reference Guide
6. Configure the
256-bit Key
Default (hexadecimal) 256-bit keys for WP2A/CCMP include:
1011121314151617
18191A1B1C1D1E1F
2021222324252627
28292A2B2C2D2E2F
7. Configure the
point roaming and key caching options. This feature is applicable only when using 802.1x
EAP authentication with WPA2/CCMP.
Pre-Authentication
NOTE PMK key caching is enabled internally by default when 802.1x EAP
8. Click the
9. Click the
and return to the

6.6 Configuring Firewall Settings

The access point's firewall is a set of related programs located in the gateway on the WAN side of
the access point. The firewall uses a collection of filters to screen information packets for known
types of system attacks. Some of the access point's filters are continuously enabled, others are
configurable.
Key Settings area as needed to set a 256-bit key.
Enter 16 hexadecimal characters into each of the four fields
displayed.
Fast Roaming (802.1x only)
Selecting this option enables an associated MU to carry out an
802.1x authentication with another access point before it roams to
it. The access point caches the keying information of the client until
it roams to the other access point. This enables the roaming client
to start sending and receiving data sooner by not having to do
802.1x authentication after it roams. This feature is only supported
when 802.1x EAP authentication is enabled.
authentication is enabled.
Apply button to save any changes made within this New Security Policy screen.
Cancel button to undo any changes made within the WPA2/CCMP Settings field
WLAN screen. This reverts all settings to the last saved configuration.
field as required to enable additional access