Rear Led; Setting Up Mus; Legacy Mus - Motorola AP-7131N-FGR Product Reference Manual

Hardware Installation 2-21

2.8.2 Rear LED

The LED on the rear (bottom) of the access point is optionally viewed using a single (customer
installed) extended light pipe, adjusted as required to suit above the ceiling installations. The LED
light pipe has the following color display and functionality:
LED 7
Blinking Red (160 msec) indicates a failure condition.
Solid Red defines the diagnostic mode.
White defines normal operation.

2.9 Setting Up MUs

2.9.1 Legacy MUs

For a discussion of how to initially test the access point to ensure it can interoperate with the MUs
intended for its operational environment, see Basic Configuration on page 3-4 and specifically Testing
Connectivity on page 3-20.
Refer to the LA-5030 & LA-5033 Wireless Networker PC Card and PCI Adapter Users Guide, available
from the Motorola Web site, for installing drivers and client software if operating in an 802.11a/g
network environment.
Refer to the Spectrum24 LA-4121 PC Card, LA-4123 PCI Adapter & LA-4137 Wireless Networker User
Guide, available from the Motorola Web site, for installing drivers and client software if operating in
an 802.11b network environment.
Use the default values for the ESSID and other configuration parameters until the network connection
is verified. MUs attach to the network and interact with the AP transparently.