Configuring Basic Wlan Security Settings - Motorola AP-7131N-FGR Product Reference Manual

10. Click Undo Changes
settings displayed on the access point Quick Setup screen to the last saved configuration.

3.4.3.1 Configuring Basic WLAN Security Settings

To configure a basic security policy for a WLAN:
NOTE A VPN tunnel must also be established to ensure the access point is using
1. From the Quick Setup screen, click the
At a minimum, a basic security scheme (in this case WPA2/CCMP) is recommended in a
network environment where sensitive data is transmitted.
NOTE For information on configuring the other encryption and authentication
2. Ensure the Name
of the policy.
Multiple WLANs can share the same security policy, so be careful not to name security
policies after specific WLANs or risk defining a WLAN to single policy. Motorola
recommends naming the policy after the attributes of the authentication or encryption type
selected.
3. Select the WPA2/CCMP (802.11i)
(if necessary) to undo any changes made. Undo Changes reverts the
a secure connection to the external server providing NTP, syslog or Radius
resources. For more information, see
page 3-17.
options available to the access point, see
page 6-2.
of the security policy entered suits the intended configuration or function
checkbox.
Defining an IPSec VPN Tunnel on
Create button to the right of the Security Policy item.
Configuring Security Options on
Getting Started 3-15