Above The Ceiling (Plenum) Installations - Motorola AP-7131N-FGR Product Reference Manual

9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.
CAUTION Ensure the safety wire and cabling used in the T-Bar installation is
!
10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten
to the T-bar.
11. The access point is ready to configure. For information on an access point default
configuration, see
configurations, see

2.7.3 Above the Ceiling (Plenum) Installations

An above the ceiling installation requires placing the access point above a suspended ceiling and
installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of the
unit. An above the ceiling installation enables installations compliant with drop ceilings, suspended
ceilings and industry standard tiles from .625 to .75 inches thick.
securely fastened to the building structure in order to provide a safe
operating environment.
Getting Started on page
System Configuration on page
3-1. For specific details on access point system
4-1.
Hardware Installation 2-15