Configuring Device Settings - Motorola AP-7131N-FGR Product Reference Manual

Hide thumbs Also See for AP-7131N-FGR:

Table of Contents

AP-7131N-FGR Access Point Product Reference Guide

3.4.3 Configuring Device Settings

Configure a set of minimum required device settings within the

(LAN, WAN etc.) can often be defined in other locations within the menu tree. When you change the

settings in the Quick Setup screen, the values also change within the screen where these parameters

also exist. Additionally, if the values are updated in these other screens, the values initially set within

the Quick Setup screen will be updated.

NOTE Beginning with the 4.0 release of the access point firmware, a new

To define a basic access point configuration:

System Configuration

screen is not already displayed.

2. Select the

radio configuration.

NOTE The WIPS Server designation and radio configuration can be defined as

scheme for radio configuration and WIPS server management has been

implemented within the Quick Setup GUI applet. These radio buttons

define how WLAN and sensor functionality are supported amongst the

radios available to the access point. The options available depend on the

SKU supported (and are described within this section).

System Configuration

part of the access point's quick setup. For a description of sensor

functionality and how it relates to access point operation, see

Sensor Support on page

from the menu tree, if the Quick Setup

tab to define the access point's system, WIPS server and

screen. The values