Installing Optional Speckled Stones - Montigo P52DF Installation & Maintenance Manual

P52DF* Indoor Gas Fireplace
Figure 23d. Completed firestone installation.
Figure 23e. Completed firestone installation. (Note: DO
NOT place ANY firestones on top of the pilot cover).
Figure 23f. Gas fireplace with firestones.
CAUTION!
If the firestones are not placed properly (ONE
LAYER ONLY), on burners excessive sooting
will result. The firestones will get very hot while
the fireplace is in operation, and should not be
handled until cool.
WARNING!
If the pilot cover is covered with firestones it may
result in delayed ignition and/or damage to the
appliance and/or surrounding property.
Page 24
Installation

Installing Optional Speckled Stones

[RR300SS + RR50SS]
Once the glass door has been removed as shown in
the previous section, place the speckled stones evenly
across the pan and burner. Ensure stones do not
overlap too much as this will effect the flame pattern,
see figure 24. DO NOT cover the pilot with stones, see
figure 24a.
Figure 24. Evenly placed speckled stones
Figure 24a. Ensure the stones DO NOT cover the pilot.
XG0196 - 150204.3