Installing Optional Speckled Stones - Montigo P42DF Installation & Maintenance Manual

P series residential fireplace
Hide thumbs Also See for P42DF:
Table of Contents

Advertisement

P42DF* Indoor Gas Fireplace
Figure 24d. Completed firestone installation.
Figure 24e. Completed firestone installation. (Note: DO NOT
place ANY firestones on top of the pilot cover).
Figure 24f. Gas fireplace with firestones.
CAUTION!
If the firestones are not placed properly (ONE LAYER ONLY),
on burners excessive sooting will result. The firestones will
get very hot while the fireplace is in operation, and should
not be handled until cool.
WARNING!
If the pilot cover is covered with firestones it may result in
delayed ignition and/or damage to the appliance and/or
surrounding property.
Page 24
Installation

Installing Optional Speckled Stones

[RR300SS]
Once the glass door has been removed as shown in
the previous section, place the speckled stones evenly
across the pan and burner. Ensure stones do not
overlap too much as this will effect the flame pattern,
see figure 25. DO NOT cover the pilot with stones, see
figure 25a.
Figure 25. Evenly placed speckled stones
Figure 25a. Ensure the stones DO NOT cover the pilot.
XG0195 - 150204.2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P42dfn-fP42dfl-f

Table of Contents