Dyna-Glo DGJ810CSB-D User Manual page 27

OPERATING INSTRUCTIONS
lighting the Side burner with a Match
1. Insert a match in the end of the match holder that is
installed on the right side of the firebox.
2. Light the match.
3. Immediately place the lit match through the spaces in
the grill gates near the ignition wire located next to the
burner.
4. Press in the control knob that operates the burner and
rotate counter-clockwise
Burner should light immediately. If burner does not light
within 5 seconds, turn the control knob to the O "OFF"
position and wait 5 minutes. Repeat steps 2 - 4 until the
burner is lit.
5. Adjust to desired cooking settings.
Using the Grate Hook
Use the grate hook (E) to lift cooking grates.
to "HIGH" position.
27
E