Dyna-Glo DGJ810CSB-D User Manual page 18

ASSEMblY INSTRUCTIONS
28. Install side burner (O) to right side burner table (K).
29. Secure side burner (O) to right side burner table
(K) using two M4x10 screws (EE). Make sure side
burner (O) is connected to side burner valve.
Hardware Used
M4x10 Screw
EE
WARNING: IT IS VERY IMPORTANT TO CHECK
AND ENSURE THAT THE SIDE BURNER IS
FULLY ENGAGED WITH THE ADJACENT
VALVE ORIFICE BEFORE COMPLETING STEP
29 AND 30. FAILURE TO DO SO MAY RESULT
WARNING
Burner
Valve Orifice
x 2
IN FIRE OR EXPLOSION,
POSSIBLY CAUSING
SERIOUS INJURY OR
DEATH. REFER TO
MAINTENANCE SECTION
INSTRUCTIONS TO
PROPERLY CHECK THE
ENGAGEMENT.
28
29
O
18
O
EE
K