Function Keys And Zone Keys - Honeywell NFS Supra Installation And Operating Manual

NFS Supra

2.1.3 Function keys and zone keys

NFS Supra control panel has 5 function push-buttons and a pushbutton for each zone.
The access to functions and push-button is limited to 2 access levels for users and a third access level only for
programmers.
Functions available in Access level 1 (user)
In Access level 1, the user can only visualize the system status and silence the buzzer:
KEYPAD ACCESS/LAMP TEST: Press this key for 3 seconds
to make a led test. All the leds and buzzer will activate for a few
seconds
BUZZER MUTE: Press this key to silence de Buzzer.
If Buzzer Mute key is pressed while Time 1 delay (acknowledgement)
is activated, Time 2 delay (Inspection) will start.
DELAY ON/OFF: Press this key to stop delays in operation
Access Level 2 (User )
All functions available in Access level 1 are also available in Access level 2.
Access Level 2 (Enable keypad)
In order to have access to user functions (level 2) and enable the
To ON position. Keypad access led ON indicates that level 2 is available.
If the key is not available: press the Keypad key while entering the access code 1221 at the same time,
by pressing the zone keys Z1, Z2, Z2 and Z1 in this order. Keypad push button led will be illuminated to
indicate the access level 2. If no other push button is pressed in 3 minutes, the control panel will return to
access level 1.
HLS-MN-025 v.04
www.honeywelllifesafety.es
www.hoeywelllifesafety.es
.
keypad: Turn the key clockwise
Zone Keys
.
Installation and Operating Manual
Operation
Function Keys
Access-Key
(User)
Page 15