Special Functions (Une-En54 Non-Compliant) - Honeywell NFS Supra Installation And Operating Manual

NFS Supra

5.5 Special Functions (UNE-EN54 non-compliant)

The control panel allows special configurations. These configurations do not comply the EN54-2/ and can only be used for special performances and to configure
the external relay cards. These options require a special access level.
Special configurations can be use at installations that do not require EN54 compliance.
The control panel allows special configurations that modify normal operation of the control panel, to suit specific needs, such as, installation in vehicles, external
UPS, resettable faults, etc..
The use of these special function configurations is not recommended because the system will not operate properly and will not comply EN54/2 - /4.
Only the consent of competent authorities, the user may use these special
configurations for special applications.
Special functions configuration:
To configure special functions, switch off the control panel l (mains supply and batteries disconnection), then connect the jumper (PROG) and connect again the
control panel as usual. Special functions leds will be lit, according to the actual configuration. Press the push-button you want to change until you obtain the
required configuration. Then remove the (PROG) jumper and the control panel will save the configuration and show the status of the system.
CAUTION! – EN54 non-compliant!
Do not use special configurations if you do not have consent of competent
authorities.
Special functions configuration does not change if you restore the panel to default values. It
is necessary to change them manually.
HLS-MN-025 v.04
www.honeywelllifesafety.es
www.hoeywelllifesafety.es
Configuration
PROG. Jumper
Programming Access: Jumper closed
Installation and Operating Manual
Page 44