Led Status Indicators - Honeywell NFS Supra Installation And Operating Manual

NFS Supra

2.1.2 LED Status Indicators

The front panel Leds are divided into two groups: General System Status Indicators, zone
status indicators.
NFS control panel has 10 system leds and 2 more leds for each zone.
Additionally, the control keys have their own led, to indicate the state of each key, such as
Mute Buzzer, Silence/Resound, Evacuate or Delay On/Off.
GENERAL INDICATORS
The General indicators report Normal state, Alarm, Fault or Disablement.
Whenever the system has an Alarm, Fault or Disablement, will light one of these LEDs.
Power (Green):
-Led Off: If the Power led is off, the system will not work. Check the main power supply, battery and their fuses.
Alarm (Red):
-Led On:
zone in alarm. Inspect the affected zone to identify the cause of the alarm. Press the Reset key (Access level 2) to make the
system return to its normal status.
HLS-MN-025 v.04
www.honeywelllifesafety.es
www.hoeywelllifesafety.es
This led is lit in green to indicate that the system is under normal operation.
This led is lit when any zone is in alarm condition.
The fire led illuminates in red to indicate that there is a fire alarm in any zone. Check the zone leds to identify which is the
Operation
General
Fault
Status
Indicators
Indicators
Installation and Operating Manual
Page 11