Zone Fault Event Condition - Honeywell MA Series Operation Manual

1.5.5 Zone fault event condition

The following display appears when the control panel is in zone fault condition. Fault events are also initially
displayed for the zone.
1
2
3
02
4

Zone with fault events

Text programmed for this zone
 Counter for faulty zones
 Zone virtual LED on
1
2
3
4
02
5

Detail of the device in fault condition
 Text programmed for the device
 Fault type description
 Counter for faulty zones

Zone virtual LED on
M-167.3-Serie-MA-EN / 11.2021
MAx panel Fire Detection System
Pressing on the escape button
inactive for 30 seconds will allow you to return to the
list of faulty areas.
Fault display in stand-by condition
or leaving the keypad
13