Panel Description; Front Panel - Icom IC-F3162DT Instruction Manual

■ Front panel

q
w
e
r
t
y
q ROTARY SELECTOR
Rotate to select the preprogrammed memory channels or
the operating zone. (Depending on the pre-programmed
settings.)
• Depending on the pre-programmed settings, selecting channel 1
using the rotary selector starts a scan. (Rotary Selector Home
function)
w ANTENNA CONNECTOR
Connects the supplied antenna. (p. 1)
!1
!0
Speaker
o
Microphone
Function display (p. 5)
i
u

PANEL DESCRIPTION

e DEALER-PROGRAMMABLE KEY [EMR]
Required functions can be programmed by your dealer.
(p. 6)
r DEALER-PROGRAMMABLE KEY [Side1]
Required functions can be programmed by your dealer.
(p. 6)
t PTT SWITCH [PTT]
Hold down to transmit; release to receive.
y DEALER-PROGRAMMABLE KEYS [Side2]/[Side3]
Required functions can be programmed independently by
your dealer. (p. 6)
u 10-KEYPAD (Depending on versions.)
The keypad allows you to enter digits to;
• Select memory channels.
• Select TX code channels.
• Select DTMF codes (during transmit).
• Set TX codes.
• Input the password.
i DEALER-PROGRAMMABLE KEYS [P0] to [P3]
Required functions can be programmed independently by
your dealer. (p. 6)
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4