Icom IC-F3162DT Instruction Manual page 11

y BELL ICON
Appears or blinks when a matching signal is received, de-
pending on the pre-programmed settings.
u CALL CODE MEMORY ICON
Appears when the call code memory is selected.
i SCROLL ICON
Appears when an SDM (Short Data Message), including
more than 12 characters, is selected in the received mes-
1, 2
sage selection mode.*
o BATTERY ICON
Appears or blinks when the battery power decreases to a
specified level.
Indication
Battery level Full
blinks when the battery is being over charged.
blinks when the battery is exhausted.
Charging
Middle No battery
required
PANEL DESCRIPTION
!0 ALPHANUMERIC DISPLAY
➥ Displays an operating channel number, channel name,
User Set mode contents, DTMF code, etc.
➥ Depending on the pre-programmed settings, characters
are displayed in 1 line or 2 lines on the LCD.
• In this instruction manual, the LCD illustration is described as
having characters displayed in 2 lines.
!1 KEY ICON
Shows the programmed function of the front panel keys
([P0], [P1], [P2] and [P3]).
* 1 BIIS operation only
2
* dPMR operation only
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6