80
GSF1200AK6/SAK6 ('06-MODEL)
REAR BRAKE HOSE ROUTING
Face the clamp end forward.
Insert the brake hose firmly.
Face the clamp end backward.
Pass through the brake pipe A under the brake
*1
pipe B.
Set the clamp to the hole of frame before tight-
*2
ening.
After the brake hose union has contacted to the
*3
stopper, tighten the union bolt.
*3
28˚
*5
Brake pipe A
Brake pipe B
*1
White paint
*6
*3
14˚
Pass through the brake hose C outside of the
*4
brake hose D.
Set the clamp to the hole of swingarm before
*5
tightening.
Pass through the brake hose D outside of the
*6
brake hose C.
*2
*4
Brake hose C
Brake hose D