Suzuki 2006 GSF1200AK6 Supplementary Service Manual page 10

ABS CONTROL UNIT CALCULATING PROCESS
The ABS controls and its calculations, in addition to the self-diagnosing and the fail-safe processes, occur
during the ABS control unit calculating process. ABS control is performed in one cycle every 10/1 000 sec-
onds. In addition, if a malfunction is detected by the self-diagnosis function, the brake stops being controlled
by the ABS and a diagnostic trouble code is stored.
Normal calculating process
Ignition switch turned to ON
ABS control unit Initialization
Wheel speed sensor signal
enters
1 cycle
10/1 000 seconds
Hydraulic unit control signal
output
Self-diagnosis (while riding)
Malfunction
indicated
Self-diagnosis
(during start up)
No malfunction
ABS control calculation
Malfunction
indicated
Correct
GSF1200AK6/SAK6 ('06-MODEL)
Calculating process when a malfunction occurs
ABS indicator light
lights up
Is ABS under control ?
NO
Prohibition of ABS control
Diagnostic trouble code
memorized
9
YES
Interim ABS control