Abs Component Removal, Inspection And Installation - Suzuki 2006 GSF1200AK6 Supplementary Service Manual

IRREPARABLE MALFUNCTIONS
Even though the ABS is operating correctly, a DTC is memo-
rized in any of the following conditions.
• If the motorcycle is put on its centerstand, the engine is
started and only the rear wheel is rotated.
• Previous malfunctions were repaired, but the DTCs were
not deleted.
• After carrying out DTC deleting and ABS operation check
(!Page 34), explain to the customer that the ABS is oper-
ating correctly.

ABS COMPONENT REMOVAL, INSPECTION AND INSTALLATION

FRONT WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
$
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the front wheel speed sensor mounting bolts.
• Remove the front wheel assembly.
(!GSF1200K6/SK6 2D-4)
#
Make sure that the motorcycle is supported securely.
• Remove the front wheel speed sensor bracket 1.
Conditions
GSF1200AK6/SAK6 ('06-MODEL) 67