Table of Contents
Advertisement
C-1
OPTIONAL FEATURES
Accessory Set (K704) - Includes electrode and work
cables, headshield, work clamp and electrode holder.
TIG Module (K930-2) - Portable, high frequency unit
with gas valve for TIG welding. Rated at 300 amps /
60% duty cycle. (Request Publication E3.205).
Power Plug Kit (K802D) - A power plug kit for the
auxiliary power receptacles is available. (Provides a
plug for each receptacle.)
Remote Control Kit (K924-4) - Contains a remote
control rheostat, and 100 ft (30.5m) cable for adjusting
the OCV at the welding site.
Trailer (K957-1) - Two-wheeled trailer for in-plant and
yard towing at speeds under 20 mph only.
Trailer (K953-1) - Two-wheeled trailer with optional
fender and light package. For highway use, consult
applicable federal, state, and local laws regarding
possible additional requirements. Choice of 2 hitches
and add on fender & light package.
Trailer, K958-1 Ball Hitch, K958-2 Lunette Eye
Hitch, K959-1 Fender & Light Kit.
WARNING
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
ACCESSORIES
(Field Installed)
Order: K953-1
SA-250
Wire Feed Module (K623-1) - Provides constant
voltage (CV) output with improved arc stability for
Innershield welding. Excellent for MIG welding.
Recommended wire feeders are the LN-7, LN-23P
and LN-25. (Factory installed on the K1643-2).
GFCI Receptacle Kit (K1690-1) - Includes one UL
approved 115V ground fault circuit interrupter duplex
type receptacle with cover and installation instruc-
tions. Replaces the factory installed 115V duplex
receptacle. Each receptacle of the GFCI duplex is
rated at 20 amps. Maximum total current from the
GFCI duplex is limited to 20 amps.
Spark Arrestor Kit (K903-1) - Includes a heavy gage
steel, approved spark arrestor, clamp and adapter for
mounting to the muffler exhaust pipe.
Oil Drain Kit (K1586-1) - Includes ball valve, hose
and clamp.
Water Valve Kit (K844-1)
C-1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
