Preparing the machine
B
Attaching the foot control
Plug foot control into machine socket (A)
and then into main socket (B).
A
Sewing speed
The sewing speed can be adjusted by
increasing or decreasing the pressure
on the foot control (C).
Assembling the thread stand
Raise the support rod fully, turning slightly
until the positioning catches engage.
Thread cones
The anti-vibration cone should be used with the
wider edge to the bottom on the spool holder
pin when sewing with cones.
When using household spools remove the
anti-vibration cones.
Place spool on spool holder pins and push
the spool caps on.
If threads slip and get twisted, cover the spools
with the nets supplied in the accessory box.
OFF
Power/light switch
O
The power switch is conveniently placed on the
ON
handwheel side of the machine.
I
"I" - ON
"O"-OFF
5