Table Of Contents - JUKI MO-50e Instruction Manual

Replace bulb with same type rated 15Watts.
Use foot controller
4C-315A221 Foot controller (100v) Japan
4C-316B22 Foot controller (115v) U.S.A.
4C-326C22 Foot controller (220v) South Africa
4C-316C24 Foot controller (220v) Argentina
4C-316C26 Foot controller (220v) Korea
4C-316C28 Foot controller (220v) the Middle East
4C-326G22 Foot controller (230v) Europe
4C-326C25 Foot controller (240v) U.K.
4C-326C23 Foot controller (240v) Australia
Contents
1. Safety regulations
5. Contents
7. Details of the machine
7. - Details of the machine
9. Preparing the machine
9. - Accessories
9. - Accessory Box
9. - Looper cover
9. - Waste collector
11. - Attaching the foot control
11. - Sewing speed
11. - Assembling the thread stand
11. - Thread cones
11. - Power/ light switch
13. Using the machine
13. - Handwheel
13. - Presser foot lifter
13. - Changing the presser foot
15. - Inserting needles
15. - To lower the upper knife
17. Threading
17. - Threading/ Preparation
17. - Upper looper (
19. - Lower looper (Red)
21. - Right needle (Green)
23. - Left needle (Yellow)
23. - After threading
25. Trial sewing, thread tension
25. - Sewing test
25. - Check your trial run
27. Adjusting the thread tension
27. - Adjusting the thread tension
29. Adjustments and settings
29. - Stitch length
29. - Cutting width
31. Differential feed*
31. - Differential feed*
31. - Gathering*
33. Practical sewing
- 3 thread overlock
- 3 thread rolled hem
- Unpicking seams
35. Maintenance
- Changing light bulb
- Cleaging and lubricating
37. Trouble shooting guide
41. Technical data
2
Blue )