Attaching The Foot Control; Power/Light Switch - JUKI MCS-1500 Instruction Manual

Preparing the machine
Polarized For UL, CSA
B
A
Polarized power
supply socket

Attaching the foot control

Plug foot control into the machine socket (A) and then into the
main socket (B). The foot control regulates the sewing speed.
The sewing speed can be adjusted by increasing or decreasing
the pressure on the foot control.
"WARNING"
This appliance has a polarized plug (for USA and Canada only,
one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in
a polarized main socket only one way.
If the plug does not fit fully in the polarized main socket, reverse
the plug. If it still does not fit, contact a qualified electrician to
install the proper polarized main socket. Do not modify the plug
in any way. (for USA, Canada only)
* Use only the foot control model YC-482 (USA, Canada), YC-
483N (220-240V).

Power/light switch

The power/light switch is on the handwheel side of the machine
in front of the plug socket.
0 = off
I = power and light on
8