Left Needle (Yellow); After Threading - JUKI MO-50e Instruction Manual

4
1
2
3
4
5
6
11
Threading

Left needle (Yellow)

- Place the spool on the
spool holder pin.
- Bring thread up through guide (1).
- Pull the thread under the
protector (2) and pass under the
guider up to go around the
pre-tension (3).
- Thread guide (4,5).
- Thread left needle eye (6)
- Place thread under presser foot.

After threading

When threading is complete, lower
the presser foot and close the
looper cover and cloth plate.
Note:
If the lower looper has to be re-
threaded, cut both needle threads off
at the needle eye and remove
surplus thread from below. Thread
the looper and then re-thread the
needles.