Lincoln Electric RANGER 250 SVM150-A Service Manual page 112

F-62
ENGINE/STATOR/ROTOR REMOVAL AND REPLACEMENT (continued)
FIGURE F. 27 – ENGINE STARTER SOLENOID LEADS (ONAN ENGINE SHOWN)
10. Refer to Figure F.27. Label engine starter
solenoid leads #211A and #209 (#211A
attaches to the solenoid spade terminal and
#209 attaches to the positive stud on the
solenoid along with the positive battery
cable). Pull lead #211A off its spade terminal.
To remove lead #209, you will have to
remove the plastic cover on the starter first.
To do this, use the 1/2" socket wrench to
remove the nut on the negative stud of the
solenoid.
Next, remove the 1/2" nut from the positive
solenoid stud. Now you can remove lead
#209 and the positive battery cable from the
starter solenoid.
TROUBLESHOOTING & REPAIR
PLASTIC
COVER ON
SOLENOID
Then remove the plastic cover.
RANGER 250
STARTER
F-62