Solving Copy Problems; Copier Does Not Respond - Lexmark CX510 Series User Manual

Troubleshooting
The print appears tinted
Action
Adjust the color balance.
a
From the Color Balance menu on the printer control panel, increase
or decrease the values for cyan, magenta, yellow, and black.
b
Resend the print job.
Does the print still appear tinted?

Solving copy problems

Copier does not respond

Action
Step 1
Check if an error or status message appears on the display.
Does an error or status message appear?
Step 2
Check if the power cord is plugged into the printer and a properly
grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
Step 3
Turn off the printer, then wait for about 10 seconds, and then turn it back
on.
Did Performing Self Test and Ready appear?
Partial document or photo copies
Action
Step 1
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?
Yes No
The problem is solved. Contact
support.
Yes No
Clear the error or status Go to step 2.
message.
Go to step 3. Connect the power
cord to the printer and
a properly grounded
electrical outlet.
The problem is solved. Contact
support.
Yes No
Go to step 2. Place the document or
photo facedown on the
scanner glass in the
upper left corner.
297
customer
customer