Lexmark CX510 Series User Manual page 153

Understanding the printer menus
Use
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Color
Auto
On
Off
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9
Allow color copies
On
Off
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
2‑up Landscape
4‑up Portrait
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Specify how the original document was produced.
Note: Color Laser is the factory default setting.
Specify whether copies are printed in color.
Note: On is the factory default setting.
Set the amount of color the printer can detect from the original document.
Note: This menu item is applicable only when Color is set to Auto.
Enable color in copies.
Notes:
•
On is the factory default setting.
• Setting this to Off hides all color‑specific menus.
•
This setting overrides the Color setting.
Specify whether an original document is two‑sided or one‑sided, and then specify
whether the copy should be two‑sided or one‑sided.
Note: 1 sided to 1 sided is the factory default setting. This setting is selected when
using a one-sided original document for a one-sided copy job.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether a border is printed.
Note: Off is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
153