Network/Ports - Lexmark CX510 Series User Manual

Understanding the printer menus
Use
Print Demo
Demo Page
[list of available demo pages]
Asset Report
Event Log Summary

Network/Ports

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Print demo files that are available in the firmware, the flash option, and the disk
option.
Print a report containing printer asset information, such as serial number and
model name.
Print a summary of logged events.
To
Allow the printer to connect to a network.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
To
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
• If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to automatically switch to PS emulation when a print job requires it,
regardless of the default printer language.
Notes:
•
On is the factory default setting.
• If PS SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
131