Lexmark CX510 Series User Manual page 180

Understanding the printer menus
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Blank Pages
Do Not Print
Print
Define binding for two-sided pages in relation to page orientation.
Notes:
• Long Edge is the factory default setting. This assumes binding along the long edge of the
page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting.
Print multiple-page images on one side of the paper.
Note: Off is the factory default setting.
Print a border on each page image.
Note: None is the factory default setting.
Specify the positioning of multiple‑page images.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in portrait or in
landscape orientation.
Specify whether to insert blank separator sheets.
Note: Off is the factory default setting.
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
180