Specifications; Front Panel Leds; Weather Forecast - Honeywell Tuxedo Touch Series Installation And Setup Manual

Specifications:

Mechanical Specifications:
Width: 8.23 inches (209.04mm)
Height: 5.59 inches (141.99mm)
Depth:1.13 inches (28.70mm)
Electrical Specifications:
Backlight OFF, Sound OFF, LAN ON, Cat 5/6 connected to:
Backlight ON, Sound OFF, LAN ON, Cat 5/6 connected to:
Backlight ON, Sound ON, LAN ON, Cat 5/6 connected to:
Operating Environment:
Humidity
Temperature:
Operating
Shipping / Storage

Front Panel LEDs

The Tuxedo Touch Keypad has three LEDs as follows:
NOTE: If the Screen Blackout feature (*EN50131 Display) is enabled (see below) the keypad returns to
the "Home" screen and the "Armed" and "Ready" status LEDs turn OFF after 30 seconds. The keypad
will remain in this state until a valid user code is entered.
*The EN50131 Display compliance feature is a European Standard designed to prevent unauthorized
users from knowing the status of the Security System.

Weather Forecast

The Weather forecast is displayed on the "Home" screen. To set the weather forecast for a specific
location, press on the "Weather" feature. Select USA, Canada or Others. Select Zip Code or Postal Code
and enter the information on the data entry keyboard or press Country/City and select from the drop
down list. Weather conditions for that location are displayed.
Note: The Weather Feature option must be enabled to operate. From the Home screen, press Setup→
System Setup → CS Setup → Options. Select the Weather Forecast option to turn this feature on or
off; press Apply.
About the System (cont'd)
93% RH, non- condensing
14˚ F to 131˚ F / -10˚ C to 55˚ C
(UL tested 32˚-120˚F / 0 to 49˚C)
-40˚ F to 158˚ F / -40˚C to 70˚C
5
9.6VDC 12VDC
170mA 140mA
280mA 225mA
340mA 260mA
SD/SDHC CARD Slot
ARMED (RED) LED
ON – System is armed.
OFF – System is not armed.
READY (GREEN) LED
ON – System is disarmed and ready to arm.
OFF – System is armed or disarmed but not
ready. If disarmed, faults or troubles are present.
MESSAGE (YELLOW) LED
FLASHING – The system contains new
message(s) for the User.
OFF – No new messages.
RESET BUTTON
Press to reset keypad
13.8VDC
125mA
200mA
240mA
6280-001-V0