Setup; Brightness And Volume Control; Display & Audio Setup; Operating Modes - Honeywell Tuxedo Touch Series Installation And Setup Manual

You may access Brightness and Volume, Display & Audio Setup, System Setup and IP Setup
from the "Setup" screen.

Brightness and Volume Control

From the "Home" screen, access the "Setup" screen as follows:
ICON
1. From the Home screen, press the Setup icon.
2. Slide the Brightness/Volume slide bar up or
down to change settings.
Yes saves the change. No discards the change.
Display & Audio Setup
You may access Operating Modes, Backlight Off After Time, To Homepage After Time, Auto
Slideshow After Time, Language Selection, and Clean Screen from Display & Audio Setup.

Operating Modes

Operating modes provides access to Chime Mode, Voice Mode, and Voice Chime.
Chime Mode – Keypad chimes whenever a door or window is open.
•
Voice Mode – Keypad voice annunciates whenever a change in system status occurs such as Armed,
•
Disarmed, or Alarms.
Voice Chime – The chime mode and voice mode are in effect. The chime beeps followed by voice
•
annunciation.
From the Home screen, press the "Setup" icon, and do the following:
ICON
1. Press the Disp & Audio Setup icon.
2. Enter your Authorized Code, if required.
3. Select Chime Mode or Voice Mode to turn
the mode on or off.
4. Press the HOME or BACK icon after
making your selection.

Language Selection (if applicable)

The Tuxedo Touch has the functionality to display four different languages including multi-lingual web
page display. Select from English, French Canadian, Latin American Spanish and Latin American
Portuguese. From the Home screen, press the "Setup" icon, and do the following:
ICON
1. Press the Display & Audio Setup icon.
2. Enter your Authorized Code, if required.
3. Select a Language.

Setup

ACTION
ACTION
ACTION
11
NOTES
If changes are made, when you exit a
"Settings Changed!" pop-up window is
displayed asking "Remember New Settings?"
NOTES
If the Chime Mode and Voice Mode are both
selected, the Voice Chime is automatically selected.
When the keypad exits the "Operating Modes"
screen, your selection is saved.
It may take a few seconds for the Chime Mode to
take effect.
NOTES
Once the language is selected, the keypad reverts
back to the "Home" screen with the selected
language applied.