Language Selection (If Applicable); Time And Date Setup; Night Setup; Web Server/Hosting - Honeywell Tuxedo Touch Series Installation And Setup Manual

Language Selection (if applicable)

After initial ECP selection is set, the "Languages" menu is displayed allowing you to select from four
languages (English, French Canadian, Latin American Spanish, or Latin American Portuguese) with the
default being English. See Setup section for further information.

Time and Date Setup

If not already set from the control panel, set the current time and date. Refer to Time/Date Setup.

Night Setup

The Keypad is defaulted to arm the system in the STAY INSTANT mode when arming the system
using the NIGHT icon. Select the arming mode to be activated when the NIGHT icon is pressed on the
"Arming" screen, refer to the "Night Setup" section.

Web Server/Hosting

The Tuxedo Touch Keypad offers web-hosting capability allowing you to access your Security and Home
Automation System via any web enabled device. The Tuxedo Touch Keypad IP Address is used on a
standard web browser to control user functions such as, Security, Z-Wave operation and camera viewing.
Web Server/Hosting is not Listed for use in UL installations. Remote
U L
Arming/Disarming/Programming is not to be used in UL Listed Installations.

IP Setup

Follow the steps below to control your local Z-Wave devices via your PC, Smart Phone or Tablet.
Automatic IP Addresses
In most cases, IP addresses are assigned 'automatically' (Automatic IP Address). The IP Address is
displayed in the lower left-hand corner on the Tuxedo Touch Keypad "Home" screen.
To access "IP Setup", from the "Home" screen, do the following:
ICON
1. Connect an Ethernet cable to the back of the
Tuxedo Touch Keypad and connect the
opposite end to the Ethernet Port of an
existing "powered-up" router.
2. At the Tuxedo Touch keypad:
a) Press the Setup icon.
b) Press the IP Setup icon. The "IP Setup"
screen displays the IP Address and
Default Gateway Address of the router.
c) Press the Refresh button; the IP
information will automatically update.
This may take up to 60 secs.
If the IP Address is not displayed, go to the "Fixed IP
Addresses" section below.
3. Press Apply; the keypad saves the
information and resets.
Enter the IP Address displayed on the keypad
into a PC, Smart Phone or Tablet Browser.
Initial Setup (cont'd)
ACTION
9
NOTES
After proper setup, the IP Address is displayed
on the "Home" screen.