Memory Programming; Programming A Memory Channel - Icom IC-A110 Instruction Manual

■ Programming a memory channel

The transceiver has 99 memory channels for storage of of-
ten-used frequencies.
q Push [V/M] to select the VFO
mode, if necessary.
w Rotate [DIAL] to select the
desired frequency.
• Push [TS](DIAL) one or more
times to use the dial select
function, if desired.
e Hold down [MW](V/M) for 5
seconds to enter memory
programming mode.
MR
• "X" and memory channel
number appear.
r Rotate [DIAL] to select the
desired memory channel
MR
number.
t Hold down [MW](V/M) for 1
second to program the infor-
mation into the channel and
return to VFO mode.
• To clear the memory informa-
tion, hold down [SQL] for 1 sec-
ond.

MEMORY PROGRAMMING

D Setting lockout channels
In order to speed up the scan periods, you can set memory
channels you don't wish to be scanned as lockout channels.
q Push [V/M] to select the Memory mode, if necessary.
• " X " appears.
w Rotate [DIAL] to select a memory channel to set as a lock-
out channel.
e Hold down [SCAN] for 5 sec-
onds to toggle the lockout
setting ON or OFF.
• "LOCK OUT" appears when
the channel is set as a lockout
channel.
*NOTE: The VFO/memory switch [V/M] and the memory
write switch [MW] functions may not be available, de-
pending on version.
4
Memory channel 8 is set
as a lockout channel.
8