Other Functions; Initial Set Mode - Icom IC-A110 Instruction Manual

■ Initial Set mode

The Initial Set mode is entered at Power ON and allows you
to set seldom-changed settings. In this way you can "custom-
ize" the transceiver operations to suit your preferences and
operating style.
D Entering Initial Set mode
q While holding down [V/M] + [TS](DIAL), push [POWER] to
turn ON the power.
• The transceiver enters the Initial Set mode and "MN", "BP", "ST"
or "PR" (p. 11) appears on the display.
w Push [TS](DIAL) to select the
desired item as described below
and to the right.
e Rotate [DIAL] to select the de-
sired option or setting.
r Turn OFF the power, then ON
again to exit the Initial Set mode
and return to the previous oper-
ating mode.
D Memory names
This item allows you to display a memory name instead of
the frequency.
• When a memory channel has not been programmed with a
name, the frequency appears instead.

OTHER FUNCTIONS

D Beep tones ON/OFF
Confirmation beep tones normally
sound when you push a key.
These can be turned ON or OFF,
as you prefer.
D Sidetones ON/OFF
When using an optional head-
set such as those from the David
Clark Co. using an the adapter,
the transceiver outputs your trans-
mitted voice to the headset for
monitoring.
• Optional OPC-871 HEADSET
ADAPTER is required.
5
10