Dell OptiPlex 9020 Owner's Manual page 40

Table 11. Cloud Desktop
Option
Server Lookup Method
Server IP Address
Server Port
Client Address Method
Client IP Address
Client SubnetMask
Client Gateway
Advanced
40
Description
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer.
Specifies the primary static IP address of the ImageServer with which the
client software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer
and when Lookup Method is set to Static IP.
Specifies the primary IP port of the ImageServer, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer.
Specifies how the client obtains the IP address.
• Static IP
• DHCP (enabled by default)
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer.
Specifies the static IP address of the client. The default IP address is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer
and when Client DHCP is set to Static IP.
Specifies the subnet mask of the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer
and when Client DHCP is set to Static IP.
Specifies the gateway IP address for the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enabled with ImageServer
and when Client DHCP is set to Static IP.
Specifies for Advanced debugging
• Verbose Mode
NOTE: This Option is only relevant when the integrated NIC control in
the System Configuration group is set to enable with Cloud Desktop.