Installing The Hard Drive; Removing The Optical Drive - Dell OptiPlex 9020 Owner's Manual

3. Disconnect the data cable and the power cable from the back of the hard drive. Press the blue
securing-bracket tabs inwards and lift the hard-drive bracket out of the hard-drive bay.
4. Flex the hard-drive bracket and remove the hard drive from the hard-drive bracket.

Installing the Hard Drive

1. Insert the hard drive into the hard-drive bracket.
2. Press the securing brackets inward and slide the hard-drive bracket into the bay.
3. Connect the data cable and the power cable to the back of the hard-drive.
4. Install the cover.
5. Follow the procedures in After Working Inside Your Computer.

Removing the Optical Drive

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. cover
b. front bezel
16