Fader stop action setting
When the fader start function is ON, you can set whether using
the fader stop function (lowering the fader to ∞) on a TASCAM
RC-9010/RC-9010S remote control (sold separately) causes
playback to stop or pause (playback standby).
1.
Press the MENU button to open the
2.
Open the
menu screen.
REMOTE
3.
Select
.
FADER STOP ACT
Press the DATA dial to move the cursor right to select the
4.
setting.
5.
Turn the DATA dial to set the action when fader stop
occurs.
•
Options:
,
STOP
STANDBY
6.
After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
•
Depending on the PLAY menu screen MONITOR PLAY STBY
item and ONLINE PLAY STBY settings, BACK CUE operation
might take place.
•
The fader stop act setting is retained even when the power is
turned OFF.
Setting the fader scale used
You can set whether to use the scale shown on the left or right
side of the fader on a TASCAM RC-9010/RC-9010S remote control
(sold separately). The indicator above the active scale lights.
1.
Press the MENU button to open the
2.
Open the
menu screen.
REMOTE
3.
Select
.
FADER SCALE
4.
Press the DATA dial to move the cursor right to select the
setting.
Turn the DATA dial to set the fader scale used.
5.
•
Options:
(left scale),
10dB MAX
default value)
6.
After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The fader scale setting is retained even when the power is turned
OFF.
screen.
MENU
(default value)
screen.
MENU
(right scale,
0dB MAX
10 – Using the remote connectors
Transmission speed setting
You can set the transmission speed (baud rate) used with a TASCAM
RC-9010/RC-9010S remote control (sold separately) or other remote
control using serial protocol.
NOTE
The following serial transmission values are fixed: 8 data bits, No
parity bit, 1 stop bit.
Press the MENU button to open the
1.
2.
Open the
REMOTE
3.
Select
SERIAL BAUD RATE
Press the DATA dial to move the cursor right to select the
4.
setting.
5.
Turn the DATA dial to set the baud rate used to
communicate with external remotes.
•
Options:
9600bps
RC-9010/RC-9010S, default value)
After completing the setting, press the HOME button to
6.
return to the Home Screen.
NOTE
The serial baud rate setting is retained even when the power is
turned OFF.
screen.
MENU
menu screen.
.
,
,
,
(for TASCAM
19200bps
38400bps
RC
TASCAM CD-9010CF
49