Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user's authority to operate this equipment. TASCAM CD-200 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Für Kunden in Europa Warnung Dies ist eine Einrichtung, welche die Funk-Entstörung nach Klasse A besitzt. Diese Einrichtung kann im Wohnbereich Funkstörungen versursachen; in diesem Fall kann vom Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen. TASCAM CD-200...
Do not disassemble a battery. The acid inside the • battery could harm skin or clothing. TASCAM CD-200 CAUTIONS ABOUT LASER RADIATION This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968,”...
1 − Introduction Thank you for your purchase of the TASCAM CD-200 Compact Disc Player. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the unit, as well as the operation of its many useful and convenient functions.
About discs In addition to audio CDs (CD-DA), the CD-200 can play CD-R and CD-RW discs on which audio CD, MP3, or WAV format files are recorded. The CD player can also...
Press this key to show for two seconds the type of information (playback time or text information) that currently appears in the main area of the display. TASCAM CD-200 Press this key again while this is being shown to change the type of information displayed. The type of information that can be shown depends on the type of disc loaded and the operation status.
The CD playback signal is output here as a digital sig- nal in S/PDIF format. VOLTAGE SELECTOR Switches the voltage to either 230 V The voltage selector is only available on units for • specific markets. In North America, use only on 120V supply. • 120 V TASCAM CD-200...
2 − Names and Functions of Parts Remote control unit (RC-CD200) TASCAM CD-200 1 Numeric keys Use these keys to select tracks. 2 DISPLAY Press this key to show for two seconds the type of information (playback time or text information) that currently appears in the main area of the display.
READ NO DISC also shown. Items with more than eight characters are scrolled when shown. * TOC means “Table Of Contents,” which is track infor- mation written on the disc appears when is shown CLOSE , etc.) are TASCAM CD-200...
When making a digital connection, use either the coaxial or optical connector. • To dub a recording digitally, prepare the disc for playback in this unit before starting recording with the recording device. TASCAM CD-200 jack on the ANALOG jacks—...
Use the remote control within the following range. • Remote sensor 15° 15° Operation distance Directly in front: Within 7 meters 15° left or right: Within 7 meters TASCAM CD-200...
Pausing playback: ª Press the PLAY/READY key on the main unit or the remote control. In this manual, unless stated otherwise, explanations are given assuming that continuous playback mode is set. (See “Playback modes” on page 17.) TASCAM CD-200...
CDs. 1 Use the remote control numeric keys (0–9) to input the track number. Input the track number starting with the first digit as in the example below. TASCAM CD-200 PLAY/READY To select track 1: ª...
To select programmed playback, press the MODE/INTRO CHECK ˙/¥ or no CD is loaded. An indicator for the current mode will appear on the display as shown below. key on the PLAY key when playback is stopped PLAY MODE INTRO CHECK key TASCAM CD-200...
In this manual, unless stated otherwise, explanations • are given assuming that continuous playback mode is set. TASCAM CD-200 Programmed playback To use programmed playback, you must set a program either before or after setting the playback mode to pro- grammed playback mode.
PROGRAM EDIT gram setting mode. key when the empty key on the remote control Program step Playback time key to show the track PROGRAM EDIT key when the final MEMORY indicator blinks.) key again to exit the pro- TASCAM CD-200...
In addition to the above procedure, opening the disc tray also clears the program. TASCAM CD-200 Time and text information display You can set what type of time and text information is shown on the display.
PITCH CONTROL Pitch can be adjusted by ±12.5%. To turn pitch control playback OFF, press the PITCH CONTROL key on the main unit again. PITCH CONTROL indicator goes off and pitch control playback turns OFF. TASCAM CD-200 indicators do PITCH...
• Ô/ (Â/¯) keys on the main unit or the search (Ô/Â, ¯/) keys on the remote con- trol to skip to the preceding or next track. Press the STOP key to stop Intro Check. • TASCAM CD-200 PLAY SEARCH...
Response Contact a TEAC repair center. Contact a TEAC repair center. Change the disc Clean or change the disc. Contact a TEAC repair center. Clean or change the disc. TASCAM CD-200...
Is the disc scratched or dirty? The files on a data CD cannot all be played ª back. e Is the unit in folder playback mode? TASCAM CD-200 6 − Troubleshooting...
ª 5 to 35°C Inclination of installation ª 5° or less Illustrations and other depictions may differ in part • from the actual product. Specifications and external appearance may be changed • without notification to improve the product. TASCAM CD-200...