Please record the model number and serial number and b) The average half-cycle r.m.s. inrush current retain them for your records. 1. On initial switch-on : 0.4Arms Model number 2. After a supply interruption of 5s : 0.14Arms Serial number TASCAM CD-200SB...
CAUTION normally, or has been dropped. • Leave 1U of space above the unit for ventilation. • Allow at least 10 cm (4 in) at the rear of the unit for ventilation. TASCAM CD-200SB...
If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. • Do not disassemble a battery. The acid inside the battery could harm skin or clothing. TASCAM CD-200SB...
Browsing folders and files ..........30 Rear panel ................12 6 – Direct folder function ..........32 Display ...................13 Saving direct folder settings .........32 Remote control unit (TASCAM RC-CD200SB) ..14 Assigning direct folders ..........32 3 – Preparations ..............16 Assigning direct folders individually ....33 Making connections ............16 Automatically assign all direct folders (AUTO SET) ..............33...
1 – Introduction Thank you for your purchase of the TASCAM CD-200SB CD / Solid Included items State Player. Before connecting and using the unit, please take time to read This product includes the following items. this manual thoroughly to ensure you understand how to Take care when opening the package not to damage the items.
Once every five years, please contact the retailer where you purchased the unit or a TASCAM service center for internal cleaning. If the unit is not cleaned for a long time and dust is allowed to accumulate inside it, fire or malfunction could result.
SD cards and USB flash drives About discs This unit can use SD cards and USB flash drives for playback and In addition to audio CDs (CD-DA), the CD-200SB can play dubbing. CD-R and CD-RW discs on which audio CD, MP3, MP2 or WAV A list of SD cards and USB flash drives that we have confirmed to format files are recorded.
Press this button while pressing and holding the DISPLAY [SHIFT] button to clear all FOLDER/TRACK SELECT (1–10/0) buttons folder assignments. This indicator blinks while clearing all assignments. (See “Clearing all direct folder assignments (CLEAR ALL)” on page 37.) TASCAM CD-200SB...
Page 11
FOLDER t [PITCH +, ] button to enter the Display currently selected folder. (See “5 – Browsing” on page 30.) Displays various information. Remote Sensor When operating the remote control unit (RC-CD200SB), point it towards here. TASCAM CD-200SB...
44.1 kHz regardless of the playback media/file sampling frequency. • Digital output is possible when the pitch control function is on with Audio CD or Data CD, but the sampling frequency is changed by an amount proportional to the pitch control value. TASCAM CD-200SB...
(from its tag data) FOLDER FOLDER CD-TEXT track artist or track artist of ARTIST INTRO indicator the current file (from its tag data) appears when the intro check function is ON. INTRO Current file name FILE TASCAM CD-200SB...
2 – Names and functions of parts Remote control unit (TASCAM RC-CD200SB) SET button Use with the direct folder function to assign folders on an SD card or USB flash drive to FOLDER/TRACK SELECT (1–10/0) buttons. (See “Assigning direct folders” on page 32.)
Page 15
(See “5 – Browsing” on page 30.) PLAY/PAUSE button Press during playback to pause. When playback is stopped or paused, press to start playback. When in browse mode, use to confirm the selected track and to start playback. TASCAM CD-200SB...
3 – Preparations Making connections Examples of connections that can be made with a CD-200SB are shown below. Precautions before making connections • Before connecting other devices, read their operation manuals carefully and connect them properly. • Turn the power OFF or set the power to standby for this unit and all units to be connected to it.
• When using other devices controlled by infrared rays, use of this remote control might operate these devices by mistake. • Use the remote control within the following range. Remote Sensor Operation distance Directly in front: Within 7 meters 15° left or right: Within 7 meters TASCAM CD-200SB...
OFF. (See “Saving direct folder settings” on page 32.) NOTE If the SD card slot cover will not close, remove the SD card once and then reinsert it. TASCAM CD-200SB...
CD to another type of media, the CD will stop if it was playing back or paused.) • Even if the current media is changed, the playback mode setting, current folder and program contents will not be erased. TASCAM CD-200SB...
".wav" file extension at the end of the name of an WAV file. The unit cannot play files that are not in the WAV data format even if they have the ".wav" file extension. TASCAM CD-200SB...
“Programmed playback” on page 24 for details. Main FOLDER Meaning display area indicator All files on the current media will be Not shown ALL PLAY played back. All files in the selected folder on the Shown FOLDER current media will be played back. TASCAM CD-200SB...
Programmed playback mode set: PROGRAM Pausing playback Press the PLAY/PAUSE button on the main unit or the remote control. In this manual, unless stated otherwise, explanations are given assuming that the playback mode is continuous. (See “Playback modes” on page 21.) TASCAM CD-200SB...
• To use the main unit FOLDER/TRACK SELECT (1–10/0) buttons or the remote number (1–10/0) buttons for direct folder selection, press the TRK SEL button on the main unit or the remote control to make the main unit TRK SEL indicator unlit. TASCAM CD-200SB...
ALL PLAY • During folder playback, random playback will play back all Change the playback area to to enable tracks in the FOLDER tracks inside the current folder randomly. current folder to be used in the program. TASCAM CD-200SB...
After replacing a track, the display shows the empty step at the end of the program and you can add another track to the end of the program if desired. 4. Press the PROGRAM EDIT button again to exit program setting mode. TASCAM CD-200SB...
When stopped, you can switch to the album title (current folder). SD card/USB flash drive When playing back, paused or stopped, you can change the information shown on the display, cycling through track elapsed time, track remaining time, title, artist and file name. TASCAM CD-200SB...
When pitch control is ON, therefore, some equipment might not be able to receive the digital output signal from the CD-200SB. • The pitch control function cannot be used with SD cards and USB flash drives.
(m/. [SELECT 5] and //, [SELECT b]) buttons to skip to the preceding or next track. o Press the STOP button to stop Intro Check. o The intro check function can be used during program and folder playback modes. TASCAM CD-200SB...
You can only browse the SD card or USB flash drive that has been inserted and selected as the current media. Information shown when browsing • Audio files (determined by extension) Files other than audio files will not be shown. • Folders TASCAM CD-200SB...
Page 31
+, ] button and remote FOLDER t [ ] button have no effect. • When a folder or file in the top level (root) is shown, the main unit FOLDER g [PITCH −, ] button and remote FOLDER g [ ] button have no effect. TASCAM CD-200SB...
(direct folder settings) are automatically saved to each SD card and USB flash drive. This data is saved in a CD-200SB settings file named, “cd-200sb. Assigning direct folders dat” that is created in the root of each SD card and USB flash drive used with this unit.
(Indicator blinking) and press the button to assign the folder. After registration completes, will appear on the display DONE for a few seconds and then the unit will return to ordinary playback mode. TASCAM CD-200SB...
• Changing direct folder assignments never erases folders on media or audio files within folders. • You can use the FOLDER g/t buttons on the main unit or the remote control to select folders and assign them to different FOLDER/TRACK SELECT (1–10/0) buttons. TASCAM CD-200SB...
If the repeat playback function is ON, the track that is playing will be played back repeatedly. FOLDER ( appears on display) FOLDER The playback area is the folder assigned to the FOLDER/TRACK SELECT (1–10/0) button (indicator lit) pushed to start playback. TASCAM CD-200SB...
CANCEL button on the main in order until the last track in the folder ends. unit or the remote. After canceling the operation, the display returns to its previous state. TASCAM CD-200SB...
To cancel the operation, when the main unit CANCEL indicator is blinking, press the CANCEL button on the main unit or the remote. After canceling the operation, the display returns to its previous state. TASCAM CD-200SB...
• When dubbing a data CD, it does not simply copy the files on the CD to the SD card or USB flash drive. • Regardless of the sampling rates of the source files, the dubbed files will all be converted to a sampling rate of 44.1 kHz. TASCAM CD-200SB...
SEL FLDR FOLDER/TRACK SELECT (1–10/0) button indicators blink or light. Blinking indicators show that no direct folder has been assigned to that button. Lit indicators show that a folder has been assigned. Cycle through dubbing destination file formats TASCAM CD-200SB...
FOLDER/TRACK SELECT (1–10/0) button selected in step 6 above, and that FOLDER/TRACK SELECT (1–10/0) button will light. NOTE The date and time data of folders and audio files created by dubbing will be different from the current date and time. TASCAM CD-200SB...
The above recording times are approximate. They may differ according to the SD/SDHC card or USB flash drive being used. o The above recording times are not continuous recording times. They are total possible recording times for SD/SDHC cards and USB flash drives. TASCAM CD-200SB...
[ERASE FOLDER] and CANCEL indicators blink, and ERASE and the name of the current folder appear alternately on the display. • If a folder that is assigned to a main unit FOLDER/TRACK SELECT (1–10/0) button is erased, that assignment will automatically be cleared. TASCAM CD-200SB...
Format the media using a computer. If this does not WRT ERR A file could not be created. work, try replacing the media. * After deleting a file on an SD card or USB flash drive using a Mac, empty the Trash before ejecting it. TASCAM CD-200SB...
Error messages If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct the problem, please contact the nearest retailer or TASCAM representative. Message...
If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling the nearest retailer or TASCAM representative. No power e Is the unit’s power plug completely inserted into a working power outlet? Remote control doesn’t work.
• Time and title display settings • Playback mode • Program (CD/SD card/USB flash drive) • Current folder (CD/SD card/USB flash drive) • Media selection • Repeat playback function setting (ON/OFF) • Pitch control ON/OFF (CD) • Pitch control value (CD) TASCAM CD-200SB...
481 x 94.5 x 298 (mm) / 18.94 x 3.72 x 11.73 (in) Dimensions • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM CD-200SB...
Page 48
CD-200SB TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED http://tascam.eu/...