Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tascam CD-355
Summary of Contents for Tascam CD-355
- Page 1 » D00989320A CD-355 Compact Disc Changer OWNER'S MANUAL...
-
Page 2: Important Safety Precautions
TEAC CORPORATION for POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE compliance could void the user's authority to oper- LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE ate this equipment. CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. TASCAM CD-355... -
Page 3: Important Safety Instructions
TASCAM CD-355... -
Page 4: Safety Information
TACT YOUR NEAREST QUALIFIED SERVICE PER- SONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. Optical pickup: Type: SF-P101NXR Manufacturer: SANYO Electric Co., Ltd Laser output: Less than 0.5 mW on the objective lens Wavelength: 765 to 815 nm TASCAM CD-355... -
Page 5: Table Of Contents
Contents Thank you for choosing TASCAM CD-355. Read this manual carefully to get the best performance from this unit. Before Use ........6 Repeat Playback . -
Page 6: Before Use
Environmental considerations Do not move the unit during playback The CD-355 may be used in most areas, but to maintain top During playback, the disc rotates at high speed. Do NOT lift or performance, and prolong operating life, observe the following move the unit during playback. Doing so may damage the disc or... -
Page 7: Discs
Since some of these discs do not the unit: comply with the CD specifications, they may not be playable on the CD-355. < Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.) < If you are in any doubt as to the care and handling of a CD-R/ CD-RW disc, read the precautions supplied with the disc, or < To remove a disc from its storage case, press down on the contact the disc manufacturer directly. -
Page 8: Name And Function
Name and Function Disc tray OPEN/CLOSE Use this button to open and close the disc tray. DISC SKIP Use this button to skip discs. POWER Press this button to turn the unit on or off. The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. DISC NO. Use these buttons to slect a disc. Remote Sensor When operating the remote control unit, point it towards the remote sensor. Display Skip/Search buttons Use these buttons to skip or search tracks. STOP (H) Use this button to stop playback. READY (J) Use this button to standby for playback. TASCAM CD-... -
Page 9: Remote Control Unit
< When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. < Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. TASCAM CD-... -
Page 10: Connection
< Keep the supplied cap to cover the optical digital terminal AC Power Cord when it is not in use. After all other connections are complete, connect the plug to the AC wall socket. Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Grasp the plug, not the cord when plugging or unplugging the power cord. TASCAM CD-... -
Page 11: Playback 1
When the unit detects no disc on the tray, the disc number < Do not touch the carousel while it is rotating. will go out. < The disc must be loaded centrally into the disc tray. If the disc < If the disc is CD, the music calendar lights to show the is not correctly loaded, it may not be possible to open the available unplayed tracks. If there are more than 14 tracks on tray again once it has closed, so you should ensure the disc is the disc, the track number 1-14 and OVER will light. always centrally loaded in the tray. < Do not force open or close the tray. TASCAM CD-... -
Page 12: Playback 2
< When the / button is pressed during playback of the last track of the disc, the first track of same disc will be played. For instance, to select track number 35, press “3” and “5”. When the . button is pressed twice during playback of the first track of the disc, the last track of the same disc will be < Direct Playback do not work with MP3 discs. When you want played. to select a file, use the SKIP buttons (.//). < During programed playback, the next or previous track in the program is played. TASCAM CD-... -
Page 13: Repeat Playback
When shuffle intro play of a disc is once over, the next disc < If the INTRO CHECK, REPEAT and SHUFFLE buttons are all will start playing. The 10 seconds of all tracks/files on all discs pressed, the first 10 seconds of tracks/files are shuffle played. are thus continuously shuffle played. When shuffle intro play of a disc is once over, the next disc will start playing. The first 10 seconds of all tracks/files on all discs are thus continuously shuffle played. TASCAM CD-... -
Page 14: Programed Playback
You can also use the SKIP buttons (.//) to select a track. < If the unit has not yet detected the contents of the disc, you can not enter 3-digit numbers with the numeric buttons. In In the stop mode, press the PROGRAM CHECK button this case use the SKIP buttons (.//). repeatedly. The track and program numbers will be shown on < You can not also enter numbers other than those detected as the display. specifying tracks/files in the disc. TASCAM CD-... -
Page 15: Intro Check
CLEAR button. The selected track/file is deleted from the program. To clear the program In the stop mode, press and hold the CLEAR button for more than 2 secomds. < If the power is turned off, the programed contents will be erased. TASCAM CD-... -
Page 16: Time Display
During playback, each time the TIME button is pressed the display changes as follows: current folder current file number of the number current folder When the disc is CD: current disc current track elapsed time of folder number - folder name (scrolling) number number the current track file number - file name (scrolling) remaining time of the current track artist name (scrolling) elapsed time of the disc album name (scrolling) remaining time of the disc song title (scrolling) In stop mode: In stop mode: total number of tracks total time of the disc total number of total number of files in the disc folders in the disc in the disc TASCAM CD-... -
Page 17: Troubleshooting
Some unknown characters are displayed on the display panel. e This unit cannot display symbols and full-size or double- byte characters (such as Japanese, Chinese, etc.) correctly. File name of MP3 should be alphanumeric characters. If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again. TASCAM CD-... - Page 18 » CD-355 TEAC CORPORATION Phone: +81-422-52-5082 www.tascam.com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.tascam.com 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A.