Home Screen - Tascam CD-9010CF Owner's Manual

Home Screen

The following information is shown on the display of the unit.
Home Screen with audio CD
Home Screen with data CD or CF card
Playback level meters
1
These show the playback level.
If you press the ST/MONO button to light the MONO
indicator, only one level bar will be shown and the indicator
on the left end will change from
depending to the menu
SYSTEM
"Mono mix setting" on page 43.)
Even when set to , if a mono WAV file is played back, the
ST
display will change to and a single level bar will be shown.
M
If you switch the menu
SYSTEM
, the display will change to a VU-type meter display. (See
PEAK
"Setting the level meter display type" on page 44.)
Index
2
This shows the currently playing or selected index number
(audio CD only).
Track time display (main area)
3
This shows the time of the current track.
The contents depend on the playback media.
Media Contents shown
Audio CD Minutes, seconds, frames
Data CD
Hours, minutes, seconds, frames
CF card
Pressing the TIME DISPLAY button switches between
elapsed time display and remaining time display.
A " " appears before the remaining time when shown.
-
When an EOM tally signal is being output, the "
"EOM functions" on page 27)
2 – Names and Functions of Parts
to , , , or ,
LR 3M 6M L R
item setting. (See
MON MIX
item to from
METER TYPE VU
" blinks. (See
:
Playback mode
4
Shows the current playback mode.
Indicator Meaning
Continuous playback mode
CONTINUE
Single playback mode
SINGLE
Program playback mode
PROGRAM
Track number
5
Shows the current track number.
Track playback position
6
Shows the current playback position as a bar. As playback
proceeds, the bar extends from the left.
Repeat playback function indicator
7
This shows the ON/OFF status of the repeat playback
function.
Indicator Meaning
No indicator Repeat playback function is OFF
Repeat playback function is ON
REPEAT
A-B repeat playback function starting
REPEAT A-
point set
A-B repeat playback function is ON
REPEAT A-B
NOTE
The A-B repeat playback function will only be displayed if
selected using a TASCAM RC-9010/RC-9010S remote controller
(sold separately).
PITCH indicator
8
The indicator appears if the pitch control function
PITCH ON
is on.
Master clock indicator
9
This shows the current master clock.
Indicator Meaning
Unit's internal clock in use
INT
Synchronized with the word clock
input through the WORD SYNC IN
EXT
connector
No signal input through the WORD
EXT NO CLK
SYNC IN connector
WORD SYNC IN connector input
EXT UNLOCK
signal unlocked
Synchronization with word clock
input through the WORD SYNC IN
(blinking) connector possible (after playback
EXT
completes, the unit will automatically
resynchronize with the word clock)
Master clock frequency is 44.1 kHz
44.1K
Master clock frequency is 48 kHz
48K
Information area
0
CD-TEXT will be shown if available.
File names will be shown when using data CDs and CF cards.
When the playback mode is set to
the next program item is shown.
Track time display (sub area)
q
The time of the current track is shown. When the main
display area shows the elapsed time, this shows the
remaining time, and vice versa.
A " " appears before the remaining time when shown.
-
, information for
PROGRAM
13
TASCAM CD-9010CF