Jensen VM9225BT Operating Instructions Manual page 29

VM9225BT
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored station.
Auto Store (AS)
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch AS on the on-screen controls to activate the Auto Store function.
The new stations replace stations already stored in that band. If you have already
set the preset memories to your favorite stations, activating the Auto-Store feature
will erase those stations and enter the new strong stations. This feature is most
useful when travelling in an area where you are not familiar with the local stations.
Preview Scan (SCAN)
To scan the AM or FM band for a preview of available stations in your particular
area, touch SCAN. The scan function will play the first 5 seconds of each station.
When a desired station is reached, touch SCAN again. Play of the selected station
will continue and the preview scan will stop.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong local radio signal
are played. To activate the Local function in the AM/FM tuner mode, touch MORE
on the touch screen. The Options tab is revealed. Touch LOC ON/OFF to turn the
local function on or off. When the Local function is active, the LOC indicator at
the top of the screen is illuminated. When the Distant function is active, the DX
indicator at the top of the screen is illuminated.
29