Items Relating To Prerolling (Nos. 401 To; Items Relating To Prerolling (Nos. 401 To - Sony SRW-5000 Operation Manual

Items Relating to Prerolling (Nos. 401 to ...)

Item number Item
401 FUNCTION MODE
AFTER CUE-UP
403 CUEUP BY TC
404 CUEUP BY CTL
405 CUE MENU
DEFAULT MODE
select
406 CUE MENU
PREROLL OFFSET
407 AUTO REWIND
408 AUTO CUE UP
Setting Function
[stop] Selects the operation mode that the VTR changes to after
still completing a cue up operation.
stop: Enters stop mode.
still: Enters still-picture mode (search mode).
Note
When setting the standard constant on the editor and
control the unit, set to "stop".
capstan only This setting is only active when item 602 is set to "TC" or
[reel/capstan] "UBIT".
capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state
[capstan only] This setting is only active when item 602 is set to "CTL".
reel/capstan capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state during
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the setting is "reel/capstan", cue up
operations are done at high speed.
Select "capstan only" when editing precision has priority.
[page mode]
Selects the default mode when the CUE menu is opened.
extend mode
page mode: PAGE mode
extend mode: EXTEND mode
[0 sec]
Sets the preroll time for a cueing up operation from the
CUE menu.
30 sec
[off] Selects the rewind mode for the end of the tape.
on off: The tape transport stops at the end of the tape.
s.rew on: The tape is automatically rewound from the end of the
s.rew: The tape is automatically rewound from the end of
[off] Selects whether or not to cue up when switching from
on standby-off to standby-on.
off: No cue-up.
on: Cue up to the time code immediately before switching
cue up. (The maximum tape speed is ten times normal
tape speed.)
during cue up. When the tape nears the cue up point
and tape speed drops to slow, the pinch turns ON.
cue up. (The maximum tape speed is ten times normal
tape speed.)
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
tape.
the tape.
For HDCAM SR L cassettes, the tape is rewound
smoothly to its beginning in SOFT REWIND mode.
(The cassette is not automatically ejected.)
For cassettes other than HDCAM SR L, SOFT
REWIND mode is disabled and the tape is rewound in
standard REW mode.
to standby-off.
163
Menu List