Select); Replace); Mode Selection (Edit Preset Replace Channel Select) - Sony SRW-5000 Operation Manual

2
Press the ALT/[F2] (FADE TIME) button to select the
fade time.
Each press of the button changes the setting in the
range 5 ms to 115 ms. At the same time, the display in
the edit image window changes to reflect the selected
time.
You can also make this setting using the VTR SETUP
menu item 811 "DIGITAL AUDIO FADE TIME".
4-6-7 External Device Audio Edit
Preset Command Replace Mode
Selection (EDIT PRESET REPLACE
CHANNEL SELECT)
You can replace channel settings for audio edit preset
commands received from editors and other external
devices. This function allows such devices to control
channels 1 to 12 on this unit.
1
Press the ALT/[F2] (REPLCE CH SEL) buttons.
The REPL CH SEL menu appears, together with the
edit preset channel selection menu for each channel on
this unit.
2
Press the [F9] (REPLCE CH SEL) button repeatedly
until "ena" is displayed.
ena: The settings of this menu are enabled.
dis: The settings of this menu are disabled and the
settings made in EDIT PRESET REPLACE
MODE SELECT and ANALOG AUDIO EDIT
PRESET REPLACE are used.
3
Select the edit preset channel for each channel.
CH1 to CH12: The edit preset command of the
selected edit preset channel controls the channel
of this unit.
4
Press the [F10] (EXIT) button.
The ALT+AUDIO menu appears again.
Setting channels for individual tracks using the F
button
You can set channels for individual tracks by pressing the
[F1] (REPLCE TR1) to [F8] (REPLCE TR8) buttons, or by
pressing the ALT button to go to the ALT+REPL CH
menu, and then pressing [F1] (REPLCE TR9) to [F4]
(REPLCE TR12) buttons.
Setting channels for individual tracks with the
numeric buttons
1
Press the cursor T or t button to align the cursor
with the track to be assigned with a channel.
2
Press the cursor R or r button to select the channel.
To restore the default settings
Press the cursor center button. The item selected by the
cursor is restored to its default setting.
To restore all tracks to their default channel
settings
Press the [F9] (REPLCE CH ALL) button in the
ALT+REPL CH menu.
All tracks are restored to their default settings.
You can also do the above procedure with the VTR
SETUP menu item "310: EDIT PRESET REPLACE
CHANNEL SELECT".
4-6-8 External Device Digital Audio
Edit Preset Command Replace Mode
Selection (AUDIO EDIT PRESET

REPLACE)

You can replace the channel settings for digital audio edit
preset commands received from editors and other external
devices. For example, some devices are capable of issuing
digital audio edit preset commands only for channels 1 to
4 (CH1 to CH4). This function allows such devices to
control channels 1 to 8 on this unit.
1
Press the ALT/[F3] (REPLACE MODE) buttons.
The REPLACE MODE menu appears, together with a
REPLACE image window.
103
4-6 AUDIO Menu