Sony SRW-5000 Operation Manual page 146

Item number Display
1E NO A11/A12 INPUT
21 REC INHIBIT MODE
22 CASSETTE REC INHIBIT
29 VPID MISMATCH BIT DEPTH
2A VPID MISMATCH COLOR SPACE
2B VPID MISMATCH LINK
INFORMATION
2D INVALID SDI DATA
34 NO CASSETTE COMPARTMENT
MODE
3B NO LTC REPRODUCED
52 NO SUPPORTED PB FORMAT
53 SYSTEM MISMATCH
55 VIDEO PLL UNLOCKED
59 INPUT AUDIO DATA MISMATCH
32.000K
5A INPUT AUDIO DATA MISMATCH
47.056K
61 Tele-File MEMORY IS FULL
62 NO AREA FOR Tele-File DATA
ADDITION
63 INVALID FORMAT Tele-File
64 Tele-File DATA WRITE FAIL
65 NO Tele-File LABEL
66 Tele-File DATA WRITE IS INHIBITED Recording or editing was started with the Tele-File in overall write
67 Tele-File DATA READ FAIL
71 INVALID FORMAT CONVERSION
72 REC/EDIT DISABLE CASSETTE
FORMAT
73 NO REFERENCE INFORMATION
74 ASYNCHRONOUS VIDEO INPUT
77 AUTO CUEUP ABORT
146
Error Messages/Warning Messages/Condition Messages
Meaning
No carrier detected on digital audio input on channels 11 and 12.
The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.
The cassette is set to inhibit recording.
The bit depth specified in the VPID of the input signal does not
match the bit length of the system.
The color space specified in the VPID of the input signal does not
match the color space of the system.
The link information specified in the VPID of the input signal does
not match the actual connector connection.
SDI input signal data is invalid.
The cassette compartment does not operate because the VTR is in
"no cassette compartment" mode.
LTC signal not detected on the tape.
The recording format cannot be played back by this unit.
The tape cannot be played with the current system settings.
Video lock generator PLL not locked to the video reference signal.
The input audio frequency is wrong.
The input audio frequency is wrong.
The remaining capacity of the Tele-File is low, and therefore the
next recording will overwrite old data.
There is no space at all in the Tele-File.
Parts of the Tele-File format are wrong.
A write to Tele-File error occurred.
The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).
inhibit mode.
A Tele-File read error occurred.
The settings do not allow format conversion.
The inserted cassette cannot be recorded or edited because of
system settings (recording format, system line, etc). This display
applies only to HDCAM/HDCAM-SR cassettes (SRW-5500 only).
Cannot lock because there is no 30 frames/second reference
information in 720/59.94p HD SDI input signals.
When external sync is selected, the external sync signal and the
HD SDI INPUT signal are more than ±5H out of phase.
Auto cue-up was aborted because the target cue-up time code is 1
second or more away from the current time code.