Figure 17 Easy Mode: Status Screen
Go to
Network
Map
Screen
5.2 What You Can Do
You can do the following in this mode:
• Use this Navigation Panel to opt out of the Easy mode
• Use the Network Map screen to check if your NBG6616 can ping the gateway and whether it is
connected to the Internet
• Use the Control Panel to configure and enable NBG6616 features, including wireless security,
wireless scheduling and bandwidth management and so on
• Use the Status Screen to view read-only information about the NBG6616, including the WAN IP,
MAC address of the NBG6616 and the firmware version
5.3 What You Need to Know
Between the different device modes, the Control Panel
depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
5.4 Navigation Panel
Use this navigation panel to opt out of the Easy mode.
Chapter 5 Easy Mode
Navigation Panel
Status Screen
Control Panel
(Section 5.5 on page
NBG6616 User's Guide
32
(Section 5.4 on page
33).
(Section 5.6 on page
(Section 5.7 on page
(Section 5.6 on page
32).
34).
40).
34) changes