ZyXEL Communications NBG6616 User Manual page 130

The following table describes the labels in this screen.
Table 56 Network > Static Route: Add/Edit
LABEL DESCRIPTION
Static Route Select to enable or disable this rule.
Route Name Type a name to identify this rule. You can use up to 31 printable English keyboard
characters, including spaces.
Destination IP This parameter specifies the IP network address of the final destination. Routing is always
Address based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
Address same segment as your NBG6616's interface(s). The gateway helps forward packets to
their destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the NBG6616.
Cancel Click Cancel to set every field in this screen to its last-saved value.
Chapter 16 Static Route
NBG6616 User's Guide
130