22.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG6616 from a remote location through the
following interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The NBG6616 is managed using the Web Configurator.
22.2 What You Can Do in this Chapter
• Use the WWW screen to define the interface/s from which the NBG6616 can be managed
remotely using the web and specify a secure client that can manage the NBG6616
on page
155).
• Use the Telnet screen to define the interface/s from which the NBG6616 can be managed
remotely using Telnet service and specify a secure client that can manage the NBG6616
22.5 on page
• Use the Wake On LAN screen to enable Wake on LAN and remotely turn on a device on the local
network
(Section 22.6 on page
22.3 What You Need to Know
Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
the client IP address. If it does not match, the NBG6616 will disconnect the session immediately.
There is already another remote management session. You may only have one remote
2
management session running at one time.
There is a firewall rule that blocks it.
3
156).
156).
NBG6616 User's Guide
154
C
HAPTER
Remote Management
(Section 22.4 on page
2 2
(Section 22.4
(Section
155) does not match