ZyXEL Communications NBG6616 User Manual page 47

Table 20 Navigation Panel: Router Mode (continued)
LINK TAB
Wireless LAN General
2.4G/5G
More AP
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
LAN IP
IP Alias
IPv6 LAN
DHCP Server General
Advanced
Client List
NAT General
Port
Forwarding
Port Trigger
Dynamic Dynamic DNS Use this screen to set up dynamic DNS.
DNS
Static Route Static Route
Security
Firewall General
Services
Content Content Filter
Filter
Parental
Control
IPv6 firewall Services
Management
Bandwidth General
Management
Advanced
Remote WWW
Management
Telnet
Wake On LAN
Chapter 6 Router Mode
FUNCTION
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Use this screen to configure multiple BSSs on the NBG6616.
Use the MAC filter screen to configure the NBG6616 to block access to
devices or block the devices from accessing the NBG6616.
This screen allows you to configure advanced wireless settings.
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
Use this screen to configure WPS.
Use this screen to add a wireless station using WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to configure LAN IP address and subnet mask.
Use this screen to have the NBG6616 apply IP alias to create LAN subnets.
Use this screen to configure the IPv6 address for the NBG6616 on the LAN.
Use this screen to enable the NBG6616's DHCP server.
Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Use this screen to view information related to your DHCP status.
Use this screen to enable NAT.
Use this screen to configure servers behind the NBG6616 and forward
incoming service requests to the server(s) on your local network.
Use this screen to change your NBG6616's port triggering settings.
Use this screen to configure IP static routes.
Use this screen to activate/deactivate the firewall.
This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Use this screen to restrict web features and designate a trusted computer.
Use this screen to block certain web features and sites containing certain
keywords in the URL.
Use this screen to configure IPv6 firewall rules.
Use this screen to enable bandwidth management.
Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG6616.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the NBG6616.
Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
NBG6616 User's Guide
47